D-Link DWS-3160 Series, Справочное руководство CLI

Страница: 742 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
738
84-2 show wireless client
Description
This command is used to display a brief summary or detailed data for clients associated to a
managed AP. If the Unified Switch is a Cluster Controller, this command will display all the
associated clients in the peer-group. When acting as a Cluster Controller, the peer switch
associated clients are displayed with an “*” (asterisk) before the Client MAC Address in the
summary command.
Format
show wireless client {[summary | <macaddr> {[client_qos {radius} | neighbor ap | statistics
{[association | session]} | dist_tunnel]}]}
Parameters
summary - (Optional) Specifies to display a brief summary of clients associated to a managed
AP.
<macaddr> - (Optional) Enter the client MAC address used here.
client_qos - (Optional) Specifies to display detailed client QoS data for the client.
radius - Specifies to display the configured values successfully obtained from a RADIUS
server for the specified client.
neighbor ap - (Optional) Specifies to display all the APs that an associated client can see in its
RF area.
statistics - (Optional) Specifies to display statistics for a specified client.
association - Specifies to display association statistics for a specified client.
session - Specifies to display session statistics for a specified client.
dist_tunnel - Specifies that Layer 2 distributed tunnel information will be displayed.
Restrictions
None.
Example
To display the client summary:
DWS-3160-24PC:admin#show wireless client summary
Command: show wireless client summary
MAC Address
(*) Peer Managed IP Address NetBIOS Name
------------------ ----------------- -----------------
*00-15-E9-C3-EB-77 192.168.69.69 W0ND3RB0-EM4D20
Total Entries : 1
DWS-3160-24PC:admin#
To displaying the QoS of a specified client: