D-Link DWS-3160 Series, Справочное руководство CLI

Страница: 202 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
198
Parameters
vlan - Assigned a VLAN as guest VLAN. The VLAN must be an existed static VLAN.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - Assigned a VLAN as guest VLAN. The VLAN must be an existed static VLAN.
<vlanid 1-4094> - Enter the VLAN ID here. This ID must be between 1 and 4094.
add - Specifies to add port list to the guest VLAN.
delete - Specifies to delete port list from the guest VLAN.
ports - Specifies the configured port(s).
<portlist> - Enter the list of ports to be configured here.
all - Specifies all ports on the Switch.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure security port(s) as specified guest VLAN member:
DWS-3160-24PC:admin#config authentication guest_vlan vlan v3 add ports 10
Command: config authentication guest_vlan vlan v3 add ports 10
Success.
DWS-3160-24PC:admin#
17-4 config authentication ports
Description
This command is used to configure security port(s).
Format
config authentication ports [<portlist> | all] {auth_mode [port_based | host_based {vlanid
<vid_list> state [enable | disable]}] | multi_authen_methods [none | any | dot1x_impb |
impb_cp | mac_impb] | cp_configuration <int 1-10>}
Parameters
ports - Specifies port(s) to configure.
<portlist> - Enter the list of ports to be configured here.
all - Specifies all ports on the Switch.
auth_mode - (Optional) Specifies the authentication mode used.
port_based - If one of the attached hosts passes the authentication, all hosts on the same
port will be granted to access network. If the user fails to authorize, this port will keep trying
the next authentication
host_based – Specifies that every user can be authenticated individually.
vlanid - (Optional) Specific authentication VLAN(s). This is useful when different VLANs on
the Switch have different authentication requirements.
<vidlist> - Enter the VLAN ID list here.
state - (Optional) Specifies the VID list's authentication state.
enable - Assign the specified VID list as authentication VLAN(s).
disable - Remove the specified VID list from authentication VLAN(s). If "vlanid" is not