D-Link DWS-3160 Series, Справочное руководство CLI

Страница: 674 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
670
DWS-3160-24PC:admin#traceroute 72.14.203.106
Command: traceroute 72.14.203.106
<10 ms 10.1.1.254
<10 ms 192.168.249.129
<10 ms 192.168.15.254
<10 ms 192.168.5.230
20 ms 124.219.29.126
20 ms 203.207.46.125
30 ms 203.207.47.49
20 ms 203.79.222.137
20 ms 211.76.96.61
20 ms 72.14.196.13
20 ms 209.85.243.26
20 ms 209.85.250.101
20 ms 209.85.241.162
20 ms 72.14.203.106
Trace complete.
DWS-3160-24PC:admin#
74-2 traceroute6
Description
This command is used to trace the IPv6 routed path between the Switch and a destination end
station.
Format
traceroute6 <ipv6addr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec 1-65535>
| probe <value 1-9>}
Parameters
<ipv6addr> - Specifies the IPv6 address of the destination end station.
ttl - (Optional) The time to live value of the trace route request. This is the maximum number of
routers that a trace route packet can pass. The traceroute command will cross while seeking
the network path between two devices. The range for the TTL is 1 to 60 hops.
<value 1-60> - Enter the time to live value here. This value must be between 1 and 60.
port - (Optional) The port number. The value range is from 30000 to 64900.
<value 30000-64900> - Enter the port number here. This value must be between 30000 and
64900.
timeout - (Optional) Defines the timeout period while waiting for a response from the remote
device. A value of 1 to 65535 seconds can be specified. The default is 5 seconds.
<sec 1-65535> - Enter the timeout period value here. This value must be between 1 and
65535 seconds.
probe - (Optional) The number of probing. The range is from 1 to 9. If unspecified, the default
value is 1.
<value 1-9> - Enter the probing number value here. This value must be between 1 and 9.