D-Link DWS-3160 Series, Справочное руководство CLI

Страница: 302 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
298
enable - Specifies the device as an RPL owner node.
disable - This node is not an RPL owner. By default, the RPS owner is disabled.
protected_vlan - Specifies to add or delete the protected VLAN group.
add - Add VLANs to the protected VLAN group.
delete - Delete VLANs from the protected VLAN group.
vlanid - Specifies the VLAN ID to be removed or added.
<vidlist> - Enter the VLAN ID list here.
sub_ring - Specifies that the sub-ring is being configured.
raps_vlan - Specifies the R-APS VLAN.
<vlanid> - Enter the VLAN ID used here.
tc_propagation - Specifies that the topology propagation state will be configured.
state - Specifies the topology propagation state.
enable - Enable the propagation state of topology change for the sub-ring.
disable - Disable the propagation state of topology change for the sub-ring. The default value
is disabled.
add - Connect the sub-ring to another ring.
delete - Disconnect the sub-ring from the connected ring.
sub_ring - Specifies that the sub-ring is being configured.
raps_vlan - Specifies the R-APS VLAN.
<vlanid> - Enter the VLAN ID used here.
revertive - Specifies the state of the R-APS revertive option.
enable - Specifies that the R-APS revertive option will be enabled.
disable - Specifies that the R-APS revertive option will be disabled.
timer - Specifies the R-APS timer used.
holdoff_time - (Optional) Specifies the holdoff time of the R-APS function. The default holdoff
time is 0 milliseconds.
<millisecond 0-10000> - Enter the hold off time value here. This value must be in the
range of 0 to 10000 milliseconds.
guard_time - (Optional) Specifies the guard time of the R-APS function. The default guard
time is 500 milliseconds.
<millisecond 10-2000> - Enter the guard time value here. This value must be in the range
of 0 to 2000 milliseconds.
wtr_time - (Optional) Specifies the WTR time of the R-APS function.
<min 5-12> - Enter the WTR time range value here. The range is from 5 to 12 minutes.
The default WTR time is 5 minutes.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the MEL of the ERPS ring for a specific R-APS VLAN:
DWS-3160-24PC:admin#config erps raps_vlan 100 ring_mel 2
Command: config erps raps_vlan 100 ring_mel 2
Success.
DWS-3160-24PC:admin#
To configure the ports of the ERPS ring for a specific R-APS VLAN: