D-Link DWS-3160 Series, Справочное руководство CLI

Страница: 882 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
878
95-12 config wireless acknowledge_rogue
Description
This command is used to acknowledge a rogue AP’s in the RF Scan database. This command can
also be used to acknowledge all rogue APs.
Format
config wireless acknowledge_rogue [<macaddr> | all]
Parameters
<macaddr> - Enter a valid MAC address of a rogue AP here.
all - Specifies that all rogue APs will be acknowledged.
Restrictions
Only Administrators can issue this command.
Example
To acknowledge all rogue APs:
DWS-3160-24PC:admin#config wireless acknowledge_rogue all
Command: config wireless acknowledge_rogue all
All rogue APs acknowledged.
Success.
DWS-3160-24PC:admin#
95-13 config wireless agetime
Description
This command is used to configure database entry age times for the Wireless Switch. A time value
of 0 indicates that entries in the corresponding database will not age and that the user must
manually delete them.
Format
config wireless agetime [ad_hoc [<int 0-168> | default] | ap_failure [<int 0-168> | default] |
rf_scan [<int 0-168> | default] | detected_client [<int 0-168> | default] | ap_provisioning_db
[<int 0-240> | default]]
Parameters
ad_hoc - Specifies the time to maintain an entry in the ad hoc client network list. A value of 0
indicates that the entries should never age out.
<int 0-168> - Enter the time to maintain and entry in the ad hoc client network list here. This
value must be between 0 and 168 hours. This default value is 24 hours.
default - Specifies that the default value will be used.
ap_failure - Specifies the time to maintain an entry in the AP association and authentication