manualshive.com logo in svg

D-Link DWS-3160-24TC, Справочное руководство

D-Link DWS-3160-24TC - управляемый коммутатор сети с функциями маршрутизации. У нас вы можете бесплатно скачать документацию, включая datasheet и руководство пользователя. Посетите наш вебсайт, чтобы загрузить и изучить информацию о продукте. manualshive.com.

Поделиться
Скачать
background image

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide 

486 

 

Appendix D  Trap Log Entries 

 

This table lists the trap logs found on the Switch. 

 

Log Entry 

Description 

ID 

L2macNotification 

This trap indicates the MAC address 
variations in the address table. 

1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.1 

L2PortSecurityViolationTrap 

When the port security trap is enabled, new 
MAC addresses that violate the pre-defined 
port security configuration will trigger trap 
messages to be sent out. 

1.3.6.1.4.1.171.11.101.1.2.100.1.2.0.2 

PortLoopOccurred 

This trap is sent when a Port loop occurs. 

1.3.6.1.4.1.171.12.41.10.0.1 

PortLoopRestart 

This trap is sent when a Port loop restarts 
after the interval time. 

1.3.6.1.4.1.171.12.41.10.0.2 

VlanLoopOccurred 

This trap is sent when a Port with a VID loop 
occurs. 

1.3.6.1.4.1.171.12.41.10.0.3 

VlanLoopRestart 

This trap is sent when a Port with a VID loop 
restarts after the interval time. 

1.3.6.1.4.1.171.12.41.10.0.4 

SafeGuardChgToExhausted 

This trap indicates System change operation 
mode from normal to exhausted. 

1.3.6.1.4.1.171.12.19.4.1.0.1 

SafeGuardChgToNormal 

This trap indicates System change operation 
mode from exhausted to normal. 

1.3.6.1.4.1.171.12.19.4.1.0.2 

MacBasedAuthLoggedSuccess 

This trap is sent when a MAC-based access 
control host is successfully logged in. 

1.3.6.1.4.1.171.12.35.11.1.0.1 

MacBasedAuthLoggedFail 

This trap is sent when a MAC-based access 
control host login fails. 

1.3.6.1.4.1.171.12.35.11.1.0.2 

MacBasedAuthAgesOut 

This trap is sent when a MAC-based access 
control host ages out. 

1.3.6.1.4.1.171.12.35.11.1.0.3 

FilterDetectedTrap 

This trap is sent when an illegal DHCP server 
is detected. The same illegal DHCP server IP 
address detected is just sent once to the trap 
receivers within the log ceasing unauthorized 
duration. 

1.3.6.1.4.1.171.12.37.100.0.1 

SingleIPMSColdStart 

The commander Switch will send 
swSingleIPMSColdStart notification to the 
indicated 

1.3.6.1.4.1.171.12.8.6.0.11 

SingleIPMSWarmStart 

The commander Switch will send 
swSingleIPMSWarmStart notification to the 
indicated host when its member generates a 
warm start notification. 

1.3.6.1.4.1.171.12.8.6.0.12 

SingleIPMSLinkDown 

The commander Switch will send 
swSingleIPMSLinkDown notification to the 
indicated host when its member generates a 
link down notification. 

1.3.6.1.4.1.171.12.8.6.0.13 

SingleIPMSLinkUp 

The commander Switch will send 
swSingleIPMSLinkUp notification to the 
indicated host when its member generates a 
link up notification. 

1.3.6.1.4.1.171.12.8.6.0.14 

SingleIPMSAuthFail 

The commander Switch will send 
swSingleIPMSAuthFail notification to the 
indicated host when its member generates an 
authentation failure notification 

1.3.6.1.4.1.171.12.8.6.0.15 

SingleIPMSnewRoot 

The commander Switch will send 
swSingleIPMSnewRoot notification to the 
indicated host when its member generates a 
new root notification. 

1.3.6.1.4.1.171.12.8.6.0.16 

SingleIPMSTopologyChange 

The commander Switch will send 
swSingleIPMSTopologyChange notification to 
the indicated host when its member generates 
a topology change notification. 

1.3.6.1.4.1.171.12.8.6.0.17 

coldStart 

A coldStart trap signifies that the SNMPv2 
entity, acting in an agent role, is reinitializing 

1.3.6.1.6.3.1.1.5.1 

Содержание DWS-3160-24TC


























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWS-3160-24TC

Cabletron Systems SEHI100TX-22 User Manual preview
SEHI100TX-22
Бренд: Cabletron Systems Страницы: 88
3Com SuperStack II Important Information preview
SuperStack II
Бренд: 3Com Страницы: 2
3Com CoreBuilder 5000 Quick Start And Reference preview
CoreBuilder 5000
Бренд: 3Com Страницы: 16
3Com CoreBuilder 9000 Quick Installation Manual preview
CoreBuilder 9000
Бренд: 3Com Страницы: 24
AVLT-Power AcePro-CE89-1 Quick Installation Manual preview
AcePro-CE89-1
Бренд: AVLT-Power Страницы: 12
Ihse Draco tera compact 480 Series User Manual preview
Draco tera compact 480 Series
Бренд: Ihse Страницы: 244
Accton Technology ES4626 Management Manual preview
ES4626
Бренд: Accton Technology Страницы: 523
Hamlet XUSB370MS User Manual preview
XUSB370MS
Бренд: Hamlet Страницы: 2
W Box Technologies 0E-8P65W4POE Manual preview
0E-8P65W4POE
Бренд: W Box Technologies Страницы: 10
BENDIX SL-3-SL-4 STOP LIGHT SWITCH Manual preview
SL-3-SL-4 STOP LIGHT SWITCH
Бренд: BENDIX Страницы: 4
STI SS2 2 Series Manual preview
SS2 2 Series
Бренд: STI Страницы: 2
Rackmount U-1601 User Manual preview
U-1601
Бренд: Rackmount Страницы: 16
Extreme Networks Summit X450-G2-24t-GE4 Installation Manual preview
Summit X450-G2-24t-GE4
Бренд: Extreme Networks Страницы: 2
SMART-AVI MU-88 User Manual preview
MU-88
Бренд: SMART-AVI Страницы: 9
Stahl 8070/2 Series Manual preview
8070/2 Series
Бренд: Stahl Страницы: 58
3onedata IES6300PRO Series Quick Installation Manual preview
IES6300PRO Series
Бренд: 3onedata Страницы: 5
Allied Telesis AT-GS903SX Installation Manual preview
AT-GS903SX
Бренд: Allied Telesis Страницы: 44
Grandbeing MX0808-31F Operating Instructions Manual preview
MX0808-31F
Бренд: Grandbeing Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды