D-Link DWS-3160-24TC, Справочное руководство

Страница: 118 / 505

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
113
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Multicast Filtering Mode
Users can configure the multicast filtering mode.
To view the following window, click L2 Features > Multicast Filtering > Multicast Filtering Mode , as show below:
Figure 7-84 Multicast Filtering Mode window
The fields that can be configured are described below:
Parameter Description
VLAN Name / VID List The VLAN to which the specified filtering action applies. Tick the All check box to
apply this feature to all the VLANs.
Multicast Filtering
Mode This drop-down menu allows you to select the action the Switch will take when it
receives a multicast packet that requires forwarding to a port in the specified VLAN.
Forward All Groups – This will instruct the Switch to forward all multicast packets to
the specified VLAN.
Forward Unregistered Groups – The multicast packets whose destination is an
unregistered multicast group will be forwarded within the range of ports specified
above.
Filter Unregistered Groups – The multicast packets whose destination is a
registered multicast group will be forwarded within the range of ports specified
above.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ERPS Settings
ERPS (Ethernet Ring Protection Switching) is the first industry standard (ITU-T G.8032) for Ethernet ring protection
switching. It is achieved by integrating mature Ethernet operations, administration, and maintenance (OAM) *
functions and a simple automatic protection switching (APS) protocol for Ethernet ring networks. ERPS provides
sub-50ms protection for Ethernet traffic in a ring topology. It ensures that there are no loops formed at the Ethernet
layer.
One link within a ring will be blocked to avoid Loop (RPL, Ring Protection Link). When the failure happens,
protection switching blocks the failed link and unblocks the RPL. When the failure clears, protection switching
blocks the RPL again and unblocks the link on which the failure is cleared.
G.8032 Terms and Concepts