D-Link DWS-3160-24TC, Справочное руководство

Страница: 437 / 505

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
432
Figure 3-36 WIDS Security AP Configuration window
The fields that can be configured or displayed are described below:
Parameter Description
Administrator
configured rogue AP If the source MAC address is in the valid-AP database on the switch or on the
RADIUS server and the AP type is marked as Rogue, then the AP state is Rogue.
Managed SSID from
an unknown AP Select Enabled to check whether an unknown AP is using the managed network
SSID. A hacker may set up an AP with managed SSID to fool users into associating
with the AP and revealing password and other secure information. Administrators with
large networks who are using multiple clusters should either use different network
names in each cluster or disable this test. Otherwise, if an AP in the first cluster
detects APs in the second cluster transmitting the same SSID as APs in the first
cluster then these APs are reported as rogues.
Managed SSID from
a fake managed AP A hacker may set up an AP with the same MAC address as one of the managed APs
and configure it to send one of the managed SSIDs. This test checks for a vendor field
in the beacons which is always transmitted by managed APs. If the vendor field is not
present, then the AP is identified as a fake AP.
AP without an SSID SSID is an optional field in beacon frames. To avoid detection a hacker may set up an
AP with the managed network SSID, but disable SSID transmission in the beacon
frames. The AP would still send probe responses to clients that send probe requests
for the managed SSID fooling the clients into associating with the hacker's AP.
This test detects and flags APs that transmit beacons without the SSID field. The test
is automatically disabled if any of the radios in the profiles are configured not to send
SSID field, which is not recommended because it does not provide any real security
and disables this test.
Fake managed AP on
an invalid channel Select Enabled to detect rogue APs that transmit beacons from the source MAC
address of one of the managed APs, but on different channel from which the AP is
supposed to be operating.
Managed SSID
detected with
incorrect security During RF Scan, the AP examines beacon frames received from other APs and
determines whether the detected AP is advertising an open network, WEP, or WPA. If
the SSID reported in the RF Scan is one of the managed networks and its configured
security not match the detected security then this test marks the AP as rogue.
Invalid SSID from a
managed AP Select Enabled to check whether a known managed AP is sending an unexpected
SSID. The SSID reported in the RF Scan is compared to the list of all configured
SSIDs that are used by the profile assigned to the managed AP. If the detected SSID
doesn't match any configured SSID then the AP is marked as rogue.