D-Link DWS-3160-24TC, Справочное руководство

Страница: 252 / 505

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
247
Figure 11-67 Global Configuration window
The fields that can be configured or displayed are described below:
Parameter Description
CP Global State
Click the radio buttons to enable or disable the CP global state.
CP Global
Operational Status
Display the status of the CP operational status.
CP Global Disable
Reason When captive portal is disabled, the field displays the reason being disabled.
Available reasons are:
Administrator Disabled , IP Address Not Configured , No IP
Routing Interface and Routing Disabled .
Additional HTTP Port
(0-65535) Enter the additional HTTP port number between 0 and 65535, except 80 and 443. 80
is reserved for HTTP default port, and 443 is reserved for HTTPS default port. The
default value is 0 which represents that no additional port is used, and the default port
(80) is used.
Additional HTTP
Secure Port (0-65535)
Enter the additional HTTPS port number between 0 and 65535, except 80 and 443.
80 is reserved for HTTP default port, and 443 is reserved for HTTPS default port. The
default value is 0 which represents that no additional port is used, and the default port
(443) is used.
Peer Switch Statistics
Reporting Interval
(15-3600) When clustering is supported on the switch, enter an interval that the peer switches
send its authenticated client statistics to the Cluster Controller periodically. The
reporting interval is in the range of 0, 15-3600 seconds. The value 0 means the
function is disabled. The default value is 120.
Authentication
Timeout (60-600) Enter a time for authentication. If a CP user does not enter valid credentials within the
time, the authentication page needs to be served again in order for the client to gain
access to the network. The value is between 60 and 600 seconds.
Click the Apply button to accept the changes made for each individual section.
CP Configuration
This window is used to create CP configuration.
To view this window, click Security > Captive Portal (CP) > CP Configuration as shown below: