D-Link DWS-3160-24TC, Справочное руководство

Страница: 402 / 505

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
397
WEP Wired Equivalent Privacy (WEP) is a data encryption protocol for
802.11 wireless networks. If this security mechanism is selected, all
wireless clients and access points on the network are configured
with a 64-bit or 128-bit Shared Key for data encryption. Select
WEP
to see the following options.
Static WEP – Select Static WEP to configure the static key
management. The following options will display:
•
Authentication – Tick the check boxes to select the
authentication type. Available options are Open System
and Shared Key .
•
WEP Key Type – Click the radio buttons to select the key
type. Available options are ASCII and HEX . ASCII key
includes upper and lower case alphabetic letters, the
numeric digits, and special symbols such as @ and #. HEX
key includes digits 0 to 9 and the letters A to F.
•
WEP Key Length (bits) – Click the radio button to select
the key length in 64 bits or 128 bits.
•
WEP Keys – Click the radio button to select the specific
transfer key. Enter up to 4 WEP keys in the text fields. The
length of keys depends on the
WEP Key Type and WEP
Key Length configured earlier.
WEP IEEE802.1X – Select WEP IEEE802.1X to see the following
options:
•
Bcast Key Refresh Rate – Enter a value to set the interval
at which the broadcast key is changed for clients associated
to this VAP.
•
Session Key Refresh Rate – Enter a value to set the
interval at which the Unicast session keys is changed.