D-Link DGS-3308 Series Скачать руководство пользователя страница 195

Страница: 195 / 242

8-port Gigabit Ethernet Switch User’s Guide

185

Figure 7-50. Filter Address Setup screen

Filter Address Table

Items on the screen above include:

•

IP Address

– The IP address that is to be filtered on the Switch.

•

Src/Dst

– Select how you want packets to be dropped by the Switch. The options are:

Dst

– destination address,

Scr

– source address, and

Either

– either a destination or a source address. When

Dst

is chosen, packets with the

above IP address as their destination will be dropped, When

Scr

is chosen, packets with the above IP address as

their source will be dropped. When

Either

is chosen, all packets with the above IP address will be dropped by the

Switch.

The Filter Address Table

•

IP Address

– Displays the IP address that is to be filtered on the Switch.

•

Src/Dst

– Displays the state of the above IP address under which packets will be dropped by the Switch. The

options are;

Dst

– destination address,

Scr

– source address, and

Either

– either a destination or a source

address.

•

Delete

– Click the icon to remove the entry from the filtering table.

BOOTP/DHCP Relay

BOOTP/DHCP relay enables end stations to use a BOOTP or DHCP server to obtain TCP/IP configuration information or

boot files to be loaded into memory, even if the servers are not on the local IP interface.

If the BOOTP or DHCP server and end station are on the same IP interface, no relay is necessary. If the servers and the end

stations are on different IP interfaces, a relay agent is necessary for the switch to forward the messages.

The relay agent forwards these packets between IP interfaces, and therefore must know the IP addresses of the BOOTP

and DHCP servers and their respective subnet names (or IP interface names).

When the Switch receives packets destined for a BOOTP or DHCP server, it forwards them to specific servers as defined in

the following configuration. The Switch also forwards packets from the BOOTP or DHCP servers to the appropriate

subnets.

The first task is to set some parameters for the relay agent to decide whether or not to forward a given BOOTP/DHCP

packet.

Содержание DGS-3308 Series



















































































































































































































































Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды

D-Link DGS-3308 Series, Руководство пользователя

Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды