D-Link DGS-3308 Series, Руководство пользователя

Страница: 183 / 242

8-port Gigabit Ethernet Switch User’s Guide
173
MAC Address Priority
Figure 7-36. Setup MAC Address Priority screen
Items on the screen above include:
Add an Entry
• VID
– The VLAN ID of the VLAN on which the MAC address above resides.
• MAC Address
– The MAC address for which priority on the Switch is to be established.
•
Priority Level
– The priority of the above MAC address. The options are;
Low
,
Med-L
– medium low,
Med-H
–
medium high, and
High
.
• Src/Dst – The state under which the above priority will be active. The options are; Dst . – destionation, Src . –
source, and Either . When Dst . is chosen, packets with the above MAC address as their destination will be given
the selected priority. When Src . is chosen, packets with the above MAC address as their source will be given the
selected priority. When Either is chosen, all packets with the above MAC address will be given the selected
priority.
Entries
• VID
– Displays the VLAN ID of the VLAN on which the MAC address above resides.
• MAC Address
– Displays the MAC address for which priority on the Switch is to be established.
•
Priority Level
– Displays the priority of the above MAC address. The options are:
Low
,
Med-L
– medium low,
Med-H – medium high, and High .
• Src/Dst – Displays the state under which the above priority will be active. The options are; Dst . – destination,
Src . – source, and Either .
Mirroring
Traffic from any source port to a target port can be mirrored for real-time analysis. A logic analyzer or an RMON probe can
then be attached to study the traffic crossing the source port in a completely unobtrusive manner. When mirroring port
traffic, note that the target port must be configured in the same VLAN and be operating at the same speed as the source
port. If the target port is operating at a lower speed, the source port will be forced to drop its operating speed to match that
of the target port.