manualshive.com logo in svg

D-Link DGS-3308 Series, Руководство пользователя

D-Link DGS-3308 Series - это мощный коммутатор уровня 3 с возможностью управления. Здесь вы можете бесплатно скачать руководство пользователя для ознакомления с возможностями этого устройства. Получите доступ к руководству на manualshive.com.

Поделиться
Скачать
background image

 

 

WARRANTIES EXCLUSIVE 

IF THE D-LINK PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT D-LINK'S OPTION, 
REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, 
EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. D-LINK NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO 
ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF D-LINK'S PRODUCTS 
D-LINK SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE 
PRODUCT DOES NOT EXIST OR WAS CAUSED BY THE CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR 
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, 
FIRE, LIGHTNING OR OTHER HAZARD. 

LIMITATION OF LIABILITY 

IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOSS OF PROFITS, COST OF COVER OR OTHER 
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT THE INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE OR 
INTERRUPTION OF A D- LINK PRODUCT, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF D-
LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
IF YOU PURCHASED A D-LINK PRODUCT IN THE UNITED STATES, SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF 
LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. 
 

Limited Warranty 

Hardware: 

D-Link warrants each of its hardware products to be free from defects in workmanship and materials under normal use and service for a period commencing 
on the date of purchase from D-Link or its Authorized Reseller and extending for the length of time stipulated by the Authorized Reseller or D-Link Branch 
Office nearest to the place of purchase. 

 

This Warranty applies on the condition that the product Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase.  A 
list of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. 

If the product proves defective within the applicable warranty period, D-Link will provide repair or replacement of the product.  D-Link shall have the sole 
discretion whether to repair or replace, and replacement product may be new or reconditioned.  Replacement product shall be of equivalent or better 
specifications, relative to the defective product, but need not be identical.  Any product or part repaired by D-Link pursuant to this warranty shall have a 
warranty period of not less than 90 days, from date of such repair, irrespective of any earlier expiration of original warranty period.  When D-Link provides 
replacement, then the defective product becomes the property of D-Link. 

Warranty service may be obtained by contacting a D-Link office within the applicable warranty period, and requesting a Return Material Authorization (RMA) 
number.  If a Registration Card for the product in question has not been returned to D-Link, then a proof of purchase (such as a copy of the dated purchase 
invoice) must be provided.  If Purchaser's circumstances require special handling of warranty correction, then at the time of requesting RMA number, 
Purchaser may also propose special procedure as may be suitable to the case. 

After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not 
be damaged in transit, and the RMA number must be prominently marked on the outside of the package.  The package must be mailed or otherwise shipped 
to D-Link with all costs of mailing/shipping/insurance prepaid. D-Link shall never be responsible for any software, firmware, information, or memory data of 
Purchaser contained in, stored on, or integrated with any product returned to D-Link pursuant to this warranty. 

Any package returned to D-Link without an RMA number will be rejected and shipped back to Purchaser at Purchaser's expense, and D-Link reserves the right 
in such a case to levy a reasonable handling charge in addition mailing or shipping costs. 

Software: 

Warranty service for software products may be obtained by contacting a D-Link office within the applicable warranty period.  A list of D-Link offices is 
provided at the back of this manual, together with a copy of the Registration Card.  If a Registration Card for the product in question has not been returned 
to a D-Link office, then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting warranty service.  The term 
"purchase" in this software warranty refers to the purchase transaction and resulting license to use such software. 

D-Link warrants that its software products will perform in substantial conformance with the applicable product documentation provided by D-Link with such 
software product, for a period of ninety (90) days from the date of purchase from D-Link or its Authorized Reseller.  D-Link warrants the magnetic media, on 
which D-Link provides its software product, against failure during the same warranty period.  This warranty applies to purchased software, and to 
replacement software provided by D-Link pursuant to this warranty, but shall not apply to any update or replacement which may be provided for download 
via the Internet, or to any update which may otherwise be provided free of charge. 

D-Link's sole obligation under this software warranty shall be to replace any defective software product with product which substantially conforms to D-Link's 
applicable product documentation.  Purchaser assumes responsibility for the selection of appropriate application and system/platform software and associated 
reference materials.  D-Link makes no warranty that its software products will work in combination with any hardware, or any application or 
system/platform software product provided by any third party, excepting only such products as are expressly represented, in D-Link's applicable product 

Содержание DGS-3308 Series



















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3308 Series

Panasonic WJSX150 - SWITCHER - ADDENDUM Addendum preview
WJSX150 - SWITCHER - ADDENDUM
Бренд: Panasonic Страницы: 48
CAME FROG PLUS Manual preview
FROG PLUS
Бренд: CAME Страницы: 2
Datavideo DAC-10 Quick Setup preview
DAC-10
Бренд: Datavideo Страницы: 2
H3C s5820x series Quick Start Manual preview
s5820x series
Бренд: H3C Страницы: 32
H3C S5830V2 series Mce Command Reference preview
S5830V2 series
Бренд: H3C Страницы: 22
H3C s5820x series Command Reference Manual preview
s5820x series
Бренд: H3C Страницы: 488
H3C S10500X Series Installation, Quick Start preview
S10500X Series
Бренд: H3C Страницы: 3
H3C S7500 Series Manual preview
S7500 Series
Бренд: H3C Страницы: 8
H3C S7500 Series Command Manual preview
S7500 Series
Бренд: H3C Страницы: 25
H3C S12500 Series Manual preview
S12500 Series
Бренд: H3C Страницы: 31
H3C S12500 Series Interface Configuration Manual preview
S12500 Series
Бренд: H3C Страницы: 23
H3C S12500 Series Software Upgrade preview
S12500 Series
Бренд: H3C Страницы: 24
H3C S12500 Series Installation Instructions Manual preview
S12500 Series
Бренд: H3C Страницы: 126
H3C S12500-X Configuration Manual preview
S12500-X
Бренд: H3C Страницы: 42
H3C S6300 Series Troubleshooting Manual preview
S6300 Series
Бренд: H3C Страницы: 32
H3C S7500 Series Installation Manual preview
S7500 Series
Бренд: H3C Страницы: 13
H3C S12500 Series Reference preview
S12500 Series
Бренд: H3C Страницы: 16
H3C S12500 Series Configuration Manual preview
S12500 Series
Бренд: H3C Страницы: 39

Бренды по названию

Популярные бренды

Загрузить еще бренды