D-Link DGS-3308 Series Скачать руководство пользователя страница 78

Страница: 78 / 242

8-port Gigabit Ethernet Switch User’s Guide

Figure 6-13. IP Setup screen

Configuring the Switch’s IP Address

The Switch needs to have an IP address assigned to it so that an In-Band network management system (e.g. Web-based

Manager

Telnet)

client can find it on the network. The

IP Setup

screen allows you to change the settings for this

management interface used on the Switch.

The fields listed under the Current Switch IP Settings heading are those that are currently being used by the Switch. The

fields listed under the New Switch IP Settings heading are those that will be used after the Switch has been Rebooted.

In Layer 2 mode, toggle the

Get IP From: < >

field using the space bar to choose from

Manual

BOOTP

, or

DHCP

This selects how the Switch will be assigned an IP address on the next reboot (or startup). If the Switch is in Layer 3 mode,

Manual

is automatically assigned.

The

Get IP From: < >

options are:

•

BOOTP –

The Switch will send out a BOOTP broadcast request when it is powered up. The BOOTP protocol

allows IP addresses, network masks, and default gateways to be assigned by a central BOOTP server. If this

option is set, the Switch will first look for a BOOTP server to provide it with this information before using the

default or previously entered settings.

•

DHCP –

The Switch will send out a DHCP broadcast request when it is powered up. The DHCP protocol

allows IP addresses, network masks, and default gateways to be assigned by a DHCP server. If this option is

set, the Switch will first look for a DHCP server to provide it with this information before using the default or

previously entered settings.

•

Manual

– Allows the entry of an IP address, Subnet Mask, and a Default Gateway for the Switch. These

fields should be of the form

xxx

, where each

xxx

is a number (represented in decimal form)

between 0 and 255. This address should be a unique address on the network assigned for use by the Network

Administrator. The fields which require entries under this option are as follows:

Содержание DGS-3308 Series



















































































































































































































































Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды

D-Link DGS-3308 Series, Руководство пользователя

Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды