D-Link DGS-3308 Series Скачать руководство пользователя страница 185

Страница: 185 / 242

8-port Gigabit Ethernet Switch User’s Guide

175

•

Direction

– Allows the specification of which packets will be mirrored based upon whether the packets are

flowing into or out of a port, or all packets (both directions). The options are:

Ingress

– packets flowing into the

mirror port,

Egress

– packets flowing out of the mirror port, and

Either

– both in to and out of the mirror port. For

example, if

Ingress

is chosen, all packets flowing into the mirror port will be duplicated and forwarded to the

target port.

Entries

•

Source Port

– Displays the port that will be mirrored.

•

Direction

– Allows the specification of which packets will be mirrored based upon whether the packets are

flowing into or out of a port, or all packets (both directions). The options are:

Ingress

– packets flowing into the

mirror port,

Egress

– packets flowing out of the mirror port, and

Either

– both in to and out of the mirror port.

Spanning Tree Protocol

The Spanning Tree Protocol can be used to detect and disable network loops, and to provide backup links between

switches, bridges, or routers. This allows the Switch to interact with other bridging devices (that is, STP compliant

switches, bridges, or routers) in your network to ensure that only one route exists between any two stations on the network.

For a more detailed description of how to use this protocol, refer to

“Spanning Tree Concepts”

, in Chapter Five.

STP Group Configuration

Figure 7-39. STP Group Configuration screen

The DGS-3308 allows you to configure Spanning Tree Groups that consist of a group of ports that will be handled as though

they were a single spanning tree device.

Note

: This function is available only when the Switch is in IP Routing mode.

Items on the screen above include:

•

Group Name

– A name given to identify a given STP group.

•

Port Members

– A list of the ports that belong to a given group.

•

New

– A link to the

STP Group Configuration - Add

window.

•

Pointer Icon

– A link to the

STP Group Configuration - Edit

window.

•

Delete

– Click this icon to remove an entry from this table.

STP Group Configuration - Add

The following window allows you to add an STP Group. Click on the Exit icon to return to the

STP Group

Configuration

menu.

Содержание DGS-3308 Series



















































































































































































































































Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды

D-Link DGS-3308 Series, Руководство пользователя

Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды