D-Link DGS-3308 Series Скачать руководство пользователя страница 103

Страница: 103 / 242

8-port Gigabit Ethernet Switch User’s Guide

port of the Layer 3 switch would not be able to receive UDP data streams at all of its ports

unless the UDP multicast packets were all forwarded to the router port.

Note:

A router port will be dynamically configured when IGMP query packets, RIPv2 multicast,

DVMRP multicast, PIM-DM multicast packets are detected flowing into a port. It is

recommended that router ports be statically configured whenever possible.

The

Action:< >

field can be toggled between

Add/Modify

and

Delete

using the space bar. To add a port to the static

router port table, select

Add/Modify

and enter the VID of the VLAN the router port will belong to.

Highlight the first field of

Router Port (

/-):[ ]

. Each port can be set individually as a router port by highlighting the

port’s entry using the arrow keys, and then toggling between

and

–

using the space bar.

Highlight

APPLY

and press enter to make the changes current. Use

Save Changes

from the

Main Menu

to enter the

changes into NV-RAM.

To delete an entry, select

Delete

and enter the VID of the VLAN for which the router port table entry is to be deleted.

Highlight

APPLY

and press

Enter

. The entry for the VLAN will be deleted. Use

Save Changes

from the

Main Menu

to enter the changes into NV-RAM.

Layer 3 Multicasting

With the Switch in IP Routing mode, highlight

Multicasting

from the

Main Menu

and press

Enter

Figure 6-39. Multicasting Menu

To set up IP multicasting on the Switch, highlight

IP Multicast Settings

from the

Multicasting Menu

and press

Enter

Содержание DGS-3308 Series



















































































































































































































































Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды

D-Link DGS-3308 Series, Руководство пользователя

Результаты поиска

Содержание DGS-3308 Series

Отзывы:

Похожие инструкции для DGS-3308 Series

Бренды по названию

Популярные бренды