DGS-3024 Layer 2 Switch CLI Reference Manual
To manually set system time and date settings:
DGS-3024:4#config time 30062003 16:30:30
Command: config time 30062003 16:30:30
Success.
DGS-3024:4#
config time_zone
Purpose
Used to determine the time zone used in order to adjust the system clock.
Syntax
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min
<minute 0-59>}
Description
This will adjust system clock settings according to the time zone. Time zone
settings will adjust SNTP information accordingly.
Parameters
operator
– Choose to add (+) or subtract (-) time to adjust for time zone
relative to GMT.
hour
– Select the number hours offset from GMT (Greenwich Mean Time).
min
– Select the number of minutes difference added or subtracted to
adjust the time zone.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure time zone settings:
DGS-3024:4#config time_zone op hour 2 min 30
Command: config time_zone op hour 2 min 30
Success.
DGS-3024:4#
config dst
Purpose
Used to enable and configure time adjustments to allow for the use of
Daylight Savings Time (DST).
Syntax
config dst [disable | repeating {s_week <start_week 1-4,last> | s_day
<start_day sun-sat>| s_mth <start_mth 1-12> | s_time <start_time
hh:mm> | e_week <end_week 1-4,last> | e-day <end_day sun-sat> |
e_mth <end_mth 1-12> | e_time <end_time hh:mm> | offset [30 | 60 | 90
| 120]} | annual {s_date <start_date 1-31> | s_mth <start_mth 1-12> |
s_time <start_time hh:mm> | e_date <end_date 1-31> | e_mth
<end_mth 1-12> | e_time <end_time hh:mm> | offset [30 | 60 | 90 |
120]}]
Description
DST can be enabled and configured using this command. When enabled
this will adjust the system clock to comply with any DST requirement. DST
123
