D-Link D DGS-3048 DGS-3048, Руководство по эксплуатации продукта

Страница: 53 / 147

DGS-3048 Gigabit Ethernet Switch Manual
Parameter Description
View Name Type an alphanumeric string of up to 32 characters that is used to identify the group of
MIB objects that a remote SNMP manager is allowed to access on the Switch. The
view name must exist in the SNMP View Table.
Access Right
Read Only
– Specifies that SNMP community members using the community string
created can only read the contents of the MIBs on the Switch.
Read Write
– Specifies that SNMP community members using the community string
created can read from, and write to the contents of the MIBs on the Switch.
To add a new entry to the SNMP Community Table, the following, the following parameters can be set:
Parameter Description
Community Name Type an alphanumeric string of up to 32 characters that is used to identify members of
an SNMP community. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch's SNMP agent.
View Name Type an alphanumeric string of up to 32 characters that is used to identify the group of
MIB objects that a remote SNMP manager is allowed to access on the Switch. The
view name must exist in the SNMP View Table.
Access Right
Read Only
– Specifies that SNMP community members using the community string
created can only read the contents of the MIBs on the Switch.
Read Write
– Specifies that SNMP community members using the community string
created can read from, and write to the contents of the MIBs on the Switch.
SNMP Host Table
Use the
SNMP Host Table
window to set up SNMP trap recipients.
Open the
SNMP Manager
folder, located in the
Administration
folder and click on the
SNMP Host Table
link. This will
open the
SNMP Host Table
window, as shown below.
To delete an existing SNMP Host Table entry, click the corresponding under the Delete heading.
To display the current settings for an existing SNMP Group Table entry, click the blue link for the entry under the Host IP
Address
heading.
Figure 7- 22. SNMP Host Table Window
To add a new entry to the Switch's SNMP Host Table, click the
Add
button in the upper left-hand corner of the window.
This will open the
SNMP Host Table Configuration
window, as shown below.
41