D-Link D DGS-3048 DGS-3048, Руководство по эксплуатации продукта

Страница: 104 / 147

DGS-3048 Gigabit Ethernet Switch Manual
Parameter Description
Method List Name Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4 The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable
- Adding this parameter will require the user to be authenticated using the
local enable password database on the Switch. The local enable password must be set
by the user in the next section entitled Local Enable Password.
none
- Adding this parameter will require no authentication to access the Switch.
radius
- Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
- Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
Configure Local Enable Password
This window will configure the locally enabled password for the Enable Admin command. When a user chooses the
"local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the
password configured here that is locally set on the Switch.
To view the following window, click
Security > Access Authentication Control > Configure Local Enable Password
:
Figure 10- 18. Configure Local Enable Password Window
To set the Local Enable Password, set the following parameters and click
Apply
.
Parameter Description
Old Local Enable
Password If a password was previously configured for this entry, enter it here in order to change it
to a new password
New Local Enable
Password Enter the new password that you wish to set on the Switch to authenticate users
attempting to access Administrator Level privileges on the Switch. The user may set a
password of up to 15 characters.
Confirm Local
Enable Password Confirm the new password entered above. Entering a different password here from the
one set in the New Local Enabled field will result in a fail message.
Click
Apply
to implement changes made.
92