CYP CDPS-CS4, Руководство по эксплуатации

Страница: 19 / 28

14
the unit itself (SysCMD), to a specified IP address (TELNET), to a
specified RS-232 port (COM), to a specified IR port (IR) or to trigger
a relay port (Relay). Sending commands to devices on the local
network, or across the internet requires the IP address and network
port number of the destination device.
Once the destination information is complete please click on the “Save
Change” button.
Note: It is strongly suggested to not set a delay time less than 100ms for
system, RS-232, IR, and relay commands or less than 500ms for Telnet
commands to ensure that the command is properly received and
executed before the next command is sent.
When you have finished editing the macro click on “Save Change”.
6.8.2 Extension Macro
Click on the “Extension Macro” tab to execute/edit the additional
software-only macro buttons. These macros can only be executed via
the WebGUI or Telnet. Macro editing in this tab is identical to editing
the prior tab’s macros.