CYP CDPS-CS4, Руководство по эксплуатации

Страница: 17 / 28

12
• Login to the WebGUI
Open a web browser on a PC/Laptop that is connected to an active
network and type the unit's IP address into the web address entry bar.
The login screen will appear and ask for a Username and Password.
The default username and password is “admin”. Please enter the
information and then click “Submit” to log in.
Note: The unit's default IP address is 192.168.1.50
On the left side of the browser you will see the following menu tabs:
Macro Settings, Extension Macro, Command Settings, UART Settings,
Network Settings, and System Settings to allow for user configuration of
the unit.
6.8.1 Macro Settings
Click on the “Macro Settings” tab to execute/edit the 8 primary
macros. These macros can be executed by activating the 8 input
triggers on the back of the unit as well as via WebGUI, Telnet, or IR
remote. Each macro can contain up to 16 individual commands.
Macros 1~8 align with Trigger IN 1~8. When a trigger signal is detected
the unit will execute the associated macro command.
There are 5 macros defined by default for testing the Control System’s
functionality. Click on macros 1~5 to demonstrate various testing