CYP CDPS-CS4, Руководство по эксплуатации

Страница: 13 / 28

8
COMMAND DESCRIPTION
TRIGGER INFO N Show settings for specified
trigger.
N=1~8 (Trigger Port)
TRIGGER ACTIVE N N1 Enable or disable trigger N.
N1=1~8
N2=ENABLE, DISABLE
TRIGGER MODE N N1 Set trigger N’s activation method.
N1=1~8
N2=RAISING, FALLING, CHANGE
Note:
• All commands must be followed by a carriage return. Commands
are not case-sensitive.
• Some COMSEND commands may require carriage returns or other
normally “illegal” characters within the sent Command Data. To
send those characters the ASCII hex value can be used when
preceded by “\x”. For example, “\x0D” would be transmitted as a
standard carriage return. Because “\” will interpreted as a special
escape character, please type “\\” if a “\” needs to be sent within
the command.