background image

DISCLAIMERS

The information in this manual has been carefully checked and 

is believed to be accurate. Cypress Technology assumes no 

responsibility for any infringements of patents or other rights of third 

parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies 

that may be contained in this document. Cypress also makes no 

commitment to update or to keep current the information contained 

in this document.
Cypress Technology reserves the right to make improvements to this 

document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, 

transcribed, stored in a retrieval system, or any of its part translated 

into any language or computer file, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or 

otherwise—without express written permission and consent from 

Cypress Technology.
© Copyright 2017 by Cypress Technology.
All Rights Reserved.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be 

trademarks of the companies with which they are associated.

Содержание CDPS-CS4





























Отзывы: