CYP CDPS-CS4, Руководство по эксплуатации

Страница: 9 / 28

4
Once connected, any typed commands will be sent directly to
the appropriate COM port.
RESET: To reset the IP settings back to factory default, press and
hold the button with a pin for 10 seconds. Both IR and COMMS
LEDs will illuminate to indicate you have successfully reset it.
6
LAN 1~4: Connect any one port to an active Ethernet network
to allow it to control other devices on the network and to be
accessed via Telnet/WebGUI. The remaining 3 ports can be
connected directly to other local devices you wish to control.
7 USB: This slot is reserved for factory firmware update only.
8
POWER: Flip this switch to power the unit on or off.
9
DC 5V: Plug the 5V DC power adapter into this port and connect it
to an AC wall outlet for power.
6.3 Remote Control
1 1~8: Press any of these buttons to activate the
corresponding Control System macro.
CR-157
5 6
7 8
3 4
1 2
1