CYP CDPS-CS4, Руководство по эксплуатации, Страница: 7 / 28

2
4. SYSTEM REQUIREMENTS
• Trigger input source equipment such as motion detection cameras,
TVs, power switches, etc.
• An active internet connection from a switch or router for control of
Ethernet devices.
5. FEATURES
• Supports 1 IR Learning input, 8 IR Blaster outputs, 8 Trigger inputs, 8
Relay outputs, 2 COM ports, and 4 Ethernet ports
• Supports an IR learning function which captures the IR signal
broadcast by your remote when you press a button for
retransmission as a part of a macro
• Supports trigger inputs with a voltage range of 0~15V (triggers at 5V)
• Supports Baud rates from 4800bps to 115200bps
• Supports 10/100 Ethernet network connections
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 2 3 4 5 6 7 8
IR
COMMS
INPUT
REALY
1 2 3 6
4 5
1 POWER LED: This LED will illuminate when the device is switched on.
2
IR WINDOW: Receives IR signals from the remote control to activate
macros 1~8.
3 INPUT LED: These LEDs will illuminate when the associated input
trigger detects a voltage high enough to trigger it (DC voltage of
5~15V).
4
RELAY LED: These LEDs represent the output relay circuit status
(green=closed, off=open).
5 IR LED: This LED will illuminate when the device is receiving or