Cyclades AlterPath ACS, Справочник по командам

Страница: 374 / 420

358 | Appendix A -
New User Background Information
This executes the ps command, searches for the cy_ras process id, then sends the signal
hup to the process, all in one step. Never kill cy_ras with the signals -9 or SIGKILL.
A.9 TS Menu Script
The ts_menu script can be used to avoid typing long Telnet or SSH commands. It
presents a short menu with the names of the servers connected to the serial ports of the
ACS. The server is selected by its corresponding number.
ts_menu must be executed
from a local session: via console, Telnet, SSH, dumb terminal connected to a serial port,
etc. Only ports configured for console access (protocols
socket_server , socket_ssh, or
socket_server_ssh ) will be presented. To start having familiarity with this application,
run ts_menu - h :
# ts_menu -h
USAGE: ts_menu options {<console port>}
-p : Display Tcp port
-P : Use the TCP port instead just IP
-i : Display Local Ip assigned to the serial port
-u <name> : Username to be used in ssh/telnet command
-U : Always ask for an username
-e <[^]char> : Escape char used by telnet or ssh
-l[c] : Sorted list ports (c option sort by console server) and exit
-auth : Interactive authentication
-ro : Read Only mode
-s : Show sorted ports
<console port> : Connect direct to [console port]
Below is an example on how TS Menu can be used:
# ts_menu
Master and Slaves Console Server Connection Menu
1 TSJen800
2 test.Cyclades.com
3 az84.Cyclades.com
4 64.186.190.85
5 az85.Cyclades.com
Type 'q' to quit, a valid option [1-5], or anything else to refresh:
By selecting 1 in this example, the user will access the local serial ports on that ACS. If
the user selects 2 through 5, remote serial ports will be accessed. This is used when there
is clustering (one ACS master box and one or more ACS slave boxes).
If the user selects 1, the following screen is displayed: