Cyclades AlterPath ACS, Справочник по командам

Страница: 284 / 420

268
PCMCIA Cards Integration
*,0,*)
INFO="Modem Slot 1 Setup"
LINK="/dev/modem"
INITCHAT="- \d\d\d+++\d\d\datz OK"
INITTAB="/sbin/mgetty"
start_fn () { return; }
stop_fn () { return; }
NO_CHECK=n
NO_FUSER=n
;;
Step 3 - If configuring a local and remote IP, modify local_IP:remote_IP entry
in /etc/ppp/options.ttyXX file.
Step 4 - To enable the call back feature, add the following entry to
/etc/mgetty/login.config
PSEUDO_CB_NAME - - /sbin/callback -S PHONE (PSEUDO_CB_NAME=cbuser)
At the end of the login.config file there is a line similar to the following:
* - - /bin/login @
Enter the below command before the above mentioned line:
<pseudo callback name> - - /sbin/callback -S <phone number of the client>
for example:
call - - /sbin/callback -S 5551212
Where, 'call' is the pseudo callback name and '5551212' is the number to dial
back.
CLI Method
To configure a CDMA PCMCIA card using the CLI method, follow the below steps:
Step 1 - Open the CLI interface by issuing the command:
# CLI
Step 2 - Configuring the CDMA parameters.
To configure speed