Cyclades AlterPath ACS, Справочник по командам

Страница: 283 / 420

AlterPath ACS Command Reference Guide
267
PCMCIA Cards Integration
CDMA Card Configuration
CDMA cards are in fact modem cards that makes it possible for ACS to receive a dial-
in connection and callback using the “ppp” protocol.
CDMA card configuration is made by setting the following parameters, which are
similar to the parameters set in a modem card.
vi Method
Step 1 - In /etc/mgetty/mgetty.config , add this entry:
port tty xx
speed 57600
data-only y
init-chat "" \d\d\d+++\d\d\dATZ OK AT$QCVAD=4 OK
Where xx is the serial port number that will be assigned to the CDMA card.
Step 2 - In /etc/pcmcia/serial.opts , add this entry:
Parameter Description
Local and Remote IP
addresses (optional) IP addresses used by “ppp” connection and set in /etc/ppp/options.ttyXX
file, where XX is the serial port being configured.
The syntax is local_IP:remote_IP
Phone number
(optional) This number will be used by the callback feature when activated and set
in /etc/mgetty/login.config file.
Speed This parameter defines the speed that ACS uses to access the card. The
parameter is set in /etc/mgetty/mgetty.config file.
Additional
Initialization
(optional) Set an additional initialization parameter to be sent to the card. There is a
default command sequence to initialize the card, but if an additional
initialization command is required by the card, it can be added using the
feature.
The command sequence is set in /etc/mgetty/mgetty.config file.
Table 7.1: CDMA configuration parameters