manualshive.com logo in svg

Cyclades AlterPath ACS, Справочник по командам

Поделиться
Скачать
Page 203
Cyclades AlterPath ACS Скачать руководство пользователя страница 203

 AlterPath ACS Command Reference Guide

187 

Administration

•

alarm

 - Activates/Deactivates the alarm feature. If you don't 

enable it, syslog messages won’t be generated when there is 
incoming data from the ports.

•

delete

 - Deletes any previously configured string.

•

edit

 - Edit any previously configured string.

Example: 

The below example will configure the ACS to send an e-mail every time 
root user logs into a server connected to the a port. We will configure the 
trigger string as “root login”. Note that the server connected to the ACS 
must be properly configured to send Syslog messages.
1. Open the CLI interface by issuing the command:

# CLI

a.

Enable Alarm Notification.

You need to enable this option, otherwise messages received in the ports will be ignored and 
not treated by Syslog-ng.

cli> config administration notifications alarm yes

a.

Add the trigger string.

Here you need to configure what string will trigger the e-mail notification. In our case it will 
be “root login”.

cli> config administration notifications addemail "root login"

a.

Configure the necessary parameters.

For sending an e-mail the following parameters need to be configured:

add Email>body "Testing configuration"

add Email>from ACS

add Email>to [email protected]

add Email>smtpserver 200.200.200.2

add Email>smtpport 25

add Email>subject "Testing Config"

The above commands configure the from/to fields, SMTP server/port and the subject/body of 
the e-mail message.

a.

Activate the configuration.

cli> config runconfig

a.

Save the configuration.

cli> config savetoflash

a.

Exit the CLI mode.

Содержание AlterPath ACS





































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды