User Guide
Surf using NetGenie
Prerequisites:
Internet connectivity through a DSL/Cable modem/Direct Internet Cable with RJ45 (Ethernet)
connection or 3G USB Modem.
At least one computer with an installed network interface adapter/wireless network adapter.
Internet browser.
Getting your NetGenie Ready
Before you begin surfing the Internet through NetGenie, you first need to assemble the appliance.
1. Look out for a sticker at the bottom of the appliance containing the default wireless network
name, technically known as SSID and a pass key specific for your appliance.
2. Plug one end of the power adapter into the socket on the back of the NetGenie Base Unit and
the other end into the nearest main socket.
3. Before you access the Internet through NetGenie, make sure the power is switched on. The
Power LED on the front panel should turn green.
Note:
SSID and pass key pre-secure your wireless network from any unauthorized access attempts.
Please note down your pass key for future reference.
Identify your Internet Setup
Depending on your network set-up, you can connect NetGenie to the Internet by referring to any of
the following scenarios:
1.
Secure Internet Connectivity through VDSL/ADSL
2.
Secure Internet Connectivity through Direct Cable
3.
Secure Internet Connectivity using USB Modem
Scenario 1 - Secure Internet Connectivity through VDSL/ADSL
Screen
– Connectivity through ADSL
