User Guide
1. Unplug the existing telephone broadband wire from your ADSL/VDSL/Cable Modem and plug
it into the NetGenie socket labeled as “DSL”.
2. Use the RJ-45 Ethernet cable provided with the NetGenie appliance to connect your computer
to any of the “LAN” NetGenie sockets and switch-on the NetGenie appliance.
OR
I.
Switch-
on your NetGenie appliance. Wait till the “Power” LED and “DSL” LED turns
green and for the
“WLAN/WPS” LED to turn green and stabilize.
II.
Start your laptop. Make sure that your Wireless Network Adapter is enabled. Your
laptop will auto detect the wireless network (SSID) named “NetGenie - XXXX”
(XXXX- alpha numeric characters).
III.
Click the Network icon in computer's system tray (bottom-right of your screen) from
where you can view available wireless networks. Select “NetGenie - XXXX”.
IV.
After selecting “NetGenie - XXXX”, you will be asked to enter the exact Security/Pass
Key printed on the sticker at the back of your appliance (Please refer to
Getting
your NetGenie Ready
section ).
3. Open your browser and go to the default IP Address i.e. https://10.1.1.1 to access NetGenie
Web Admin Console. Use the default User Name and Password i.e. ‘admin’ to log in.
4. You need to configure network settings to connect to the Internet. You can either run the
NetGenie ‘Network Configuration Wizard’ (or configure the settings
manually
through NetGenie
user interface
.
5. Once you finish configuring necessary network settings, you can start surfing the Internet.
Your computer is now secured with the Quick Security feature automatically turned on.
Note:
To configure age-appropriate Internet access for your family members, refer the
Family
Protection
section
.
If you are unable to connect to the Internet after following above procedure, please revert
to your original setup and visit NetGenie
’s support section at
www.netgenie.net
.
