Curtiss-Wright FHF5-PC4MWB04-00 Скачать руководство пользователя страница 9

Страница: 9 / 101

1-1

FibreXtreme Hardware Reference

INTRODUCTION

1.1

How to Use This Manual

1.1.1 Purpose

This manual introduces the FibreXtreme SL100/SL240 family of products, and provides

guidance through the process of unpacking, setting up, and programming the cards.

NOTE

: Both the FibreXtreme SL100 and SL240 hardware are referred to throughout

this manual as SL240. The software that supports both the SL100 and SL240 hardware

is referred to as SL240, including the driver and API. Anything that is exclusive to the

SL100 or the SL240 is described as such.

1.1.2 Scope

This manual contains the following information:



An introduction to FibreXtreme SL240.



Applications and topologies for SL240 boards.



Instructions for installing and configuring the card.



An operational overview of the product.



General card specifications.



Programming information.



Summary of the protocol used by the SL240 boards.



Ordering information for all products mentioned in this manual.



A brief introduction to the Front Panel Data Port (FPDP) interface.



Definitions of words, phrases, and terms used in this manual.



List of key words referenced in this manual.

The information in this manual is intended for information systems personnel, system

coordinators, or highly skilled network users with at least a systems-level understanding

of general computer processing, memory, and hardware operation.

Содержание FHF5-PC4MWB04-00

































































































Результаты поиска

Содержание FHF5-PC4MWB04-00

Отзывы:

Curtiss-Wright FHF5-PC4MWB04-00, Справочник по аппаратуре, Страница: 9 / 101

Результаты поиска

Содержание FHF5-PC4MWB04-00

Отзывы: