Curtiss-Wright FHF5-PC4MWB04-00, Справочник по аппаратуре

Страница: 28 / 101

INSTALLATION
Copyright 2017 3-2 FibreXtreme Hardware Reference
To insert an SFP module, hold the module with the PCB cutout facing downward toward the
Sl240 card and slide it into the receptacle cage on the card. There will be a small click as the
module latches into place. The SFP module is designed to only fit into the receptacle cage a
certain way. If the SFP module is inserted wrong, it will not fully slide into the receptacle
cage. If this happens, remove the module and reinsert it correctly.
To remove an SFP module, press or slide the latch release on the module. This is usually a
button or tab on the bottom side of the module that moves toward the rear of the card. The
module will pop out slightly as the latch releases. Pull the module out of the receptacle cage.
The SL240 cards are shipped with a Dust/EMI plug for each SFP transceiver receptacle.
Install these in empty receptacles to prevent contamination of internal components and to
optimize EMI performance.
3.5
Install the Cards
WARNING : Turn off all power to your operating system before attempting to install the
SL240 Cards.
3.5.1 SL240 PCI Card
To install the SL240 PCI card, push the card into the motherboard, as shown in Figure 3-1,
steps 1 and 2, until it is firmly seated. Install the mounting screw as shown in step 3.
Figure 3-1 SL240 PCI Card Installation