Curtiss-Wright FHF5-PC4MWB04-00, Справочник по аппаратуре

Страница: 16 / 101

PRODUCT OVERVIEW
Copyright 2017 2-4 FibreXtreme Hardware Reference
Figure 2-6 SL240 PMC 33 MHz Card
2.2
SL240 Features
SL240 provides reliable point-to-point or broadcast interconnects between systems, with
minimal overhead and very low latency. The protocol involved for this transport is based on
Fibre Channel, though it is not Fibre Channel compliant. The major SL240 features are
listed below:
 Uses proven 8B/10B encoding for data transmission.
 End-to-end throughput of 247 MB/s with or without frame checksums (SL240).
 End-to-end throughput of 105 MB/s with or without frame checksums (SL100).
 Minimizes implementation cost and enhances throughput by using a simple
protocol.

Provides built-in data synchronization with very little reduction in throughput.
 Integrated interrupt controller to report link failure, transaction completion, or buffer
space request.
 Status LED that reports link stability.
 Loop operation with out-of-band arbitration or point-to-point operation.
 Provides a register set designed for easy programming and status retrieval.
 Small Form Factor (SFF) media option available on SL240 Rugged Conduction
Cooled PMC and SL100 5 volt PMC.
 Small Form Factor Pluggable (SFP).
 SFP media options for long-reach wavelength laser, long wavelength laser, short
wavelength laser, and HSSDC2 copper.
 64-bit operation is backward compatible to 32-bit, 33 MHz.
 SL240 66 MHz PCI support (3.3 V signaling only) in PCI and PMC form factor.
 128 MB Receive FIFO.
 1 KB Transmit FIFO.
 Ruggedized versions of some cards are available.

Also available with 60 MHz or 120 MHz clocking options.