Cupra BORN, Руководство пользователя

Страница: 82 / 343

High-voltage battery Charging the high-voltage battery
81
1
2
3
• OR: if Release connector automatically is
activated in the charging settings
›››
page 36 ,
the charging connector automatically unlocks
once the charging process is complete.
• Disconnect the charging cable from the
power supply and replace the protective cap.
•
Close the charging cover and make sure you
hear it click into place.
Charging with direct current (DC)
Fig. 73 Behind the battery charging cover
on the rear right-hand side.
›››
Fig. 73
Charging process display
Charging socket
Protective cap
The alternating current is converted into direct
current outside the vehicle. A considerably
higher charging power is achieved than when
charging with alternating current (AC).
Public fast-charging station : The high-voltage
battery can be charged with direct current
(DC) at an appropriate charging station. The
charging time diminishes significantly.
Use a charging cable less than 30 metres long.
Connecting the charging cable
•
Unlock the vehicle.
• Press the battery's charging socket cover to
open it.
•
Remove the protective cap and hang it on
the hook
›››
Fig. 73
3
• Plug the charging station’s charging connec-
tor into the charging socket
›››
Fig. 73
2
The connector locks automatically.
The LED (charging process indicator) of
the charging socket flashes or flashes white
›››
Fig. 73
1
›››
page 82
Automatic start of charging
Switch on the charging station
›››
.
The charging process will start immediately.
During the charging
The charging process display on the charging
socket flashes green
›››
Fig. 73
1
.
If the charging process indicator lights up red,
there is a fault
›››
page 82 .
Interrupt the charging process
The charging process can be stopped before
the desired state of charge is reached:
• Press the
STOP
function button on the info-
tainment system's display. The charging proc-
ess indicator located next to the charging
socket lights up white
›››
Fig. 73
1
. The
charging connector is unlocked.
After charging
When the desired state of charge has been
reached, the charging process indicator on the
charging socket will light up green.
After charging, the charging connector auto-
matically unlocks from the charging station.
•
Unplug the charging connector from the
charging socket.
• Place the protective cap on the charging
socket’s lower connection
›››
Fig. 73
3
•
Close the cover of the battery charging
socket until you hear it has engaged.
NOTICE
To use the charging station, bear in mind
the manufacturer’s indications and usage in-
structions.