Cupra BORN, Руководство пользователя

Страница: 206 / 343

Parking and manoeuvring Peripheral view system (Top View Camera)
205
A
B
C
D
WARNING
The smart technology incorporated into the
Top View Camera system cannot overcome
the limits imposed by the laws of physics
and it only works within the limits of the sys-
tem. The greater convenience provided by
the Area View system should never tempt
you to take any risk that may compromise
safety. If used negligently or involuntarily,
it may cause serious accidents and injuries.
The system is not a replacement for driver
awareness.
• Adapt your speed and driving style to
suit visibility, weather, road and traffic condi-
tions.
• Do not be distracted from the traffic by
looking at the screen.
•
Monitor the area around the vehicle at
all times, since the cameras do not capture
small children, animals and certain objects in
all situations.
• The system will probably be unable to rep-
resent all areas clearly.
NOTICE
•
The camera images are only two-dimen-
sional. Due to a lack of spatial depth, objects
that jut out or holes on the road, for exam-
ple, are more difficult to detect or may not be
seen at all.
• In certain circumstances, the camera does
not capture objects such as beams, fences,
posts or thin trees, which could damage the
vehicle.
• The system displays the auxiliary lines and
boxes regardless of the vehicle's environ-
ment, no objects are detected. The driver is
responsible for determining that the vehicle
will fit in the parking space.
Area View system
Fig. 156 Display of the Area View system:
aerial view.
There are four different views to choose from:
Front camera area
Right camera area
Rear camera area
Left camera area
Function buttons
›››
Fig. 156 :
Exit the current display.
Adjust the display: bright, contrast and
colour.
Depending on the equipment: con-
necting and disconnecting the ParkPi-
lot sound.
The top view is generated by combining the
images from all the cameras
›››
Fig. 156 .
The top view can be selected by pressing the
vehicle inside the zone.
Select the corresponding view by pressing the
different areas
›››
Fig. 156
A
to
D
of the top
view or the reduced top view.
Conditions necessary for the use of the Area
View system
• The doors and the rear lid must be closed.
•
The image must be reliable and clear. For this
reason, for example, the camera lens must be
clean.
•
The area around the vehicle must be clearly
and totally visible.