Cupra BORN, Руководство пользователя

Страница: 159 / 343

Assistant systems
158
NOTICE
•
Damage to the radiator grille, bumper,
wheel arch and vehicle underbody can mod-
ify the orientation of the sensors. This can af-
fect the parking aid function. Have the func-
tion checked by a specialised workshop.
• A number plate or number plate holder
with dimensions that exceed the space for
the number plate, or a cured or deformed
number plate can cause false detections or a
loss of visibility for the sensors.
Note
• In order to guarantee good operation, keep
the sensors clean, free of snow and ice, and
do not cover them with stickers or other ob-
jects.
• If you use high-pressure or vapour equip-
ment for cleaning, do not apply it directly,
unless you do so very briefly, and always keep
a distance of more than 10 cm away.
• Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation of
the Park Assist.
Area View system
Fig. 126 On the rear bumper: location of
the rear assist camera.
Depending on your vehicle’s equipment, it can
be fitted with 1 or 4 cameras that provide sup-
port to the following functions:
•
Area view system
›››
page 204 .
•
Rear View Camera
›››
page 202 .
WARNING
Fitting a number plate frame may interfere
with the view shown on the screen, as it may
reduce the camera’s field of vision.
NOTICE
•
In order to guarantee good system opera-
tion, keep the cameras clean, free of snow or
ice, and do not cover them with stickers or
other objects. The camera can be cleaned by
operating the wiper.
• Never use abrasive cleaning products to
clean the camera lens.
• Do not use hot or warm water to remove ice
or snow from the camera lens. Doing so could
damage the camera.
Speed limiter
Introduction
The speed limited helps the driver not to ex-
ceed a set speed.
Speed range
The speed limiter helps avoid exceeding a pro-
grammed speed, from 30 km/h (20 mph) ap-
prox. and faster.
By selecting the speed limiter
The speed limitation can be interrupted at any
time by depressing the accelerator pedal fully,
beyond the point of resistance. As soon as the
saved speed is exceeded, the green indicator
light flashes and an audible warning signal may
sound. The speed is stored.