Cupra BORN, Руководство пользователя

Страница: 149 / 343

Driving
148
Troubleshooting
Steering fault
The warning lamp lights up or flashes red.
There is a fault in the electromechanical steer-
ing or the electronic steering column lock.
• Stop driving! Seek specialist assistance.
• If the warning lamp lights up red, the steer-
ing may be stiff because the power steering is
not working.
• If the warning lamp flashes red, the steering
column cannot be unlocked.
• Do not allow the vehicle to be towed on its
own wheels.
Steering fault
The control lamp lights up or flashes yellow.
The steering is stiffer or reacts more sensitively
than usual.
The control lamp
lights up and remains lit :
• Switch the drive system back on and drive
slowly for a short distance.
•
Contact a specialist workshop if the control
lamp remains on.
The control lamp
flashes :
•
Turn the steering wheel slightly from one
side to the other.
• Turn off the ignition and turn it on again.
• Please note the warnings displayed in the
Digital Cockpit.
• If the control lamp continues flashing after
the ignition has been switched on, do not con-
tinue driving. Seek specialist assistance.
Drive Profiles
Introduction
The driver can use the drive profiles to adapt
various features of the vehicle's systems to the
current driving situation, the desired driving
comfort and an economical driving style. Some
of the systems that can be adapted are the
suspension, steering, drive system and air con-
ditioning.
Depending on the vehicle’s equipment, vari-
ous drive profiles can be selected. The degree
of influence of the vehicle's systems on the dif-
ferent drive profiles depends on the vehicle’s
equipment.
Vehicles with adaptive suspension (DCC)
When driving, the adaptive suspension (DCC)
continuously adapts the suspension to the
terrain and the driving situation in question.
When doing so, the DCC also takes into ac-
count the vehicle's configuration in the selec-
ted drive profile.
Selecting a driving profile
Fig. 120 Multifunction steering wheel:
DRIVE and CUPRA buttons for selecting and
changing the driving profile.
The drive profile can be selected when the ig-
nition is switched on and the vehicle is station-
ary or moving
›››
.
Selecting a driving profile
•
Press the > Drive Profile function button.
• OR: Press the function button > Vehicle
settings > Drive Profile to display the availa-
ble profiles.
• OR: Press the function button , slide your
finger horizontally across the screen to Drive
Profile . Press to change the driving profile or
double press on the icon to show the available
profiles.
•
OR: With the Infotainment System turned
off, by pressing on the Drive Profile icon, the
available driving profiles will be displayed.