Cupra BORN, Руководство пользователя

Страница: 103 / 343

Opening and closing
102
ted, the light on the button flashes. All windows
can now be opened or closed simultaneously
with one of the two buttons .
If more than 10 seconds elapse without the
electric windows being operated, after the
comfort opening and closing has been activa-
ted, the operation of the front door windows is
reactivated.
Briefly press and hold the button
to deac-
tivate the function.
When the ignition is off, the windows can be
opened and closed from the outside with the
vehicle key:
•
Press and hold the unlock button or lock
button on the key.
• Hold a finger on the locking sensor surface
of the door handle for a few seconds until the
windows are closed
›››
page 91 . The vehicle
key must be in the proximity zone for this pur-
pose.
• To interrupt the function, release the unlock
or lock button, OR remove your finger from
the sensor surface.
A valid vehicle key must be present in the vicin-
ity for this purpose. Once all the windows are
closed, all of the turn signals flash once as a
confirmation.
The comfort opening settings can be changed
in the infotainment system's
Vehicle
menu.
One-touch opening and closing
The one-touch automatic opening and clos-
ing is used to open or close the windows com-
pletely. It will not be necessary to hold the but-
ton of the corresponding electric window.
For the automatic raising function : pull the
button for the corresponding window upwards
until it reaches the second position.
For the automatic lowering function : push the
button for the corresponding window down-
wards until it reaches the second position.
Stop automatic movement : push or pull on the
button of the corresponding window.
Resetting one-touch opening and closing
If the 12-volt battery is disconnected or dis-
charged when the windows are not completely
closed, the electric window automatic raising
and lowering function deactivates and has to
be reset:
•
Switch the ignition on.
• Close all windows and doors.
•
Pull the corresponding window button up-
wards and hold it in this position for a few sec-
onds.
•
Release the button, pull it up again and hold
it in this position. This resets the automatic
raising and lowering function.
The function can be reset for a single window
or for several windows at the same time.
WARNING
Observe the safety warnings
›››
in Intro-
duction on page 98
.
• Incorrect use of the electric windows can
result in injury.
•
Never close the rear lid without observing
and ensuring it is clear, to do otherwise could
cause serious injury to you and third parties.
Make sure that no one is in the path of a win-
dow.
•
If the ignition is switched on, the electric
equipment could be activated with risk of in-
jury, for example, in the electric windows.
• The doors can be locked using the remote
control key. This could become an obstacle
for assistance in an emergency situation.
• Therefore always take the key with you
when you leave the vehicle.
•
The electric windows will work until the ig-
nition has been switched off and one of the
front doors has been opened.
•
If necessary, use the safety switch to disa-
ble the rear electric windows. Make sure that
they have been disabled.
• For safety reasons, you should only use
the remote control open and close functions
within about 2 metres of the vehicle. To avoid
injuries, always keep an eye on the windows
when pressing the button to close them. The
windows stop moving as soon as the button is
released.