Cumberland PNEG-499, Инструкция по установке и эксплуатации

Страница: 42 / 64

5. Installation
42 PNEG-499 Cycle Plus Pan Feeder
FEEDING
RUN TIME
1.
Press Feeding Run Time key
2.
Press keys until the feeding run time you wish to
alter is on display
3. Press Modify key
4.
Press keys to set minutes
5. Press Enter key
6.
Press keys to set seconds
7.
Press Enter key
8.
Press keys
9.
Repeat Steps 3-8 until preset number of feeding cycles are
programmed with correct run time.
NOTE: Any feeding run time may be reprogrammed by going to
that feeding run time number and following
Steps 3-7
.
Alternate flashing of feeding
cycle number and feeding run
time for cycle
Alternate flashing of number
and run time for feedings
Flashing minutes
Flashing seconds
Alternate flashing of number
and correct feeding run time
for feedings
FILL
SYSTEM
DELAY
1.
Press Fill System Delay key
2. Press Modify key
3.
Press keys to set minutes
4. Press Enter key
5.
Press keys to set seconds
6.
Press Enter key
Fill system delay time
Flashing minutes
Flashing seconds
Correct fill system delay time
in minutes and seconds
Function Step Display