Cumberland PNEG-499, Инструкция по установке и эксплуатации

Страница: 35 / 64

5. Installation
PNEG-499 Cycle Plus Pan Feeder 35
Cable and Winch Installation (Continued)
Attach a 2" x 8" (5 cm x 20 cm) board to the ceiling a few feet from the center of the feeder line. The board
must be parallel to the feeder line and must span at least three (3) rafters. Attach the winch to the board.
The brake mechanism will protrude on one side.
(See Figure 5AH.)
Figure 5AH
For systems shorter than 360' (109.73 m), extend the winch cable (3/16") the full length of the feeder line,
stringing the cable through the cable hole on the winch drum. Attach the cable temporarily to the ceiling
with nails, staples, or some type of fastener. The winch cable does not pass through any pulleys except
for the 3-1/2" (8.89 cm) cast iron pulleys at the ends near the nylon elbows.
(See Figure 5AI.)
Figure 5AI
Ref # Description
G Rafter
H 2" x 8" Board (5 cm x 20 cm)
I Winch