Cumberland PNEG-499, Инструкция по установке и эксплуатации

Страница: 29 / 64

5. Installation
PNEG-499 Cycle Plus Pan Feeder 29
Feed Hopper Assembly (Continued)
Slide the assembled hopper onto the top of the boot and secure it by inserting the pin from the boot through
the holes in the hopper bottom flange and boot top flange. Hang the agitator arm by the ‘‘S-hook’’ from a
hole in the center of the hopper brace.
(See Figure 5Y.)
Figure 5Y
Assemble the hopper lid halves using the nuts and bolts provided. Place the lid on the hopper so the
notches in the lid fit around the hanger brackets.
(See Figure 5Z.)
Figure 5Z
Ref # Description
D Unloader
E Agitator Arm
Ref # Description
F Notch
G Lid Half