Cumberland PNEG-499, Инструкция по установке и эксплуатации

Страница: 38 / 64

5. Installation
38 PNEG-499 Cycle Plus Pan Feeder
"Throwback" Installation
Drops located so close to the winch that they will wrap onto the drum when the feeder line is raised
must be connected to the winch cable by a "throwback". This is a suspension drop which routes the cable
away from the winch far enough so that the cable clamp sleeve and drop cable do not get wound onto the
winch drum.
(See Figure 5AN.)
Figure 5AN
Cycle Plus Pan Feeder Control Installation
Install the Cycle Plus Pan Feeder Control Panel in a convenient location for easy access. Mount the panel
toward the center of the house and keep the it high enough so birds cannot interfere with its operation.
Functions
To select a function, depress the appropriate function switch. An indicator LED just to the left of the switch
will indicate the function that is selected.
Time of Day: This indicates the time of day on the four (4) digit LED display. Two (2) LEDs on the right of
the display indicated whether the time is AM or PM. Two LEDs on the left indicate day 1 or day 2 (48 hour
clock). The time is retained even during a power outage by an internal rechargeable battery - for up to (48
hours). If for some reason, the power should be OFF too long and the time is lost, when the unit is powered
ON, a time of 12:00 AM will be flashing on the display--indicating the time must be reset.
Feedings per Day: This indicates how many feedings per day there will be--up to 20 per 48 hour period.
Feeding Start Time: Indicates at what time the feedings will begin.
Feeding Run Time: Indicates how long each feeding will run.
Fill System Delay: Indicates length of time fill system will start before the first feeding.
Program: These keys are used to enter program information for the functions described above.
Ref # Description
A Maximum distance feeder line is to be raised.