Cumberland EXPERT-50, Руководство пользователя

Страница: 6 / 57

6
Expert-50 rev.10
Expert-50
HUMIDITY COMPENSATION
The minimum ventilation speed can be adjusted automatically as a
function of relative humidity. Cooling units can be shut off when humid-
ity levels are too high. In addition, heater outputs can be activated when
humidity levels are too high.
SIX INDEPENDENT TEMPERATURE PROBE INPUTS
Up to six temperature probes can be connected to the controller in order
to obtain a more accurate reading of the average room temperature and
a faster reaction time. Probes can be configured to use zoned heaters.
PASSWORD PROTECTION
A password feature can be enabled to restrict access to the controller
setup functions.
BACKUP BATTERY
A backup battery allows the unit to keep time in case of a power failure.
OVERLOAD AND OVERVOLTAGE PROTECTION
Resettable fuses are provided at low-voltage inputs and outputs of the
controller to protect its circuitry in the case of an overload or overvolt-
age.
COMPUTER CONTROL
The controller can be connected to a computer, thus making it possible
to centralize the management of information and diversify control
strategies.
TEST MODE
A test mode allows you to simulate temperature changes and verify
controller performance, as well as manually activate each output sequen-
tially.
CONTROL OF AIR INLET MOVEMENT
If the Expert-50 is used in combination with one or more air inlet mod-
ules, the movement of air inlets can be coordinated with the operation of
the fans using a potentiometer located on the panel drive. This allows the
air inlets to be adjusted correctly, without the influence of uncontrollable
factors such as wind or air from adjoining rooms.