Installing the Tubular Motor Mount
1. Attach the motor mount (118) to either the left track or the right track (depending on which end of the
system the tubular motor (89) is to be installed) using four 1/4"-20 x 1/2" hex bolts (2) and 1/4" hex
nuts (14).
NOTE:
Install the bolts (2) through the holes of the motor mount (118) and through the respective
holes of the guide bracket. Tighten the hardware.
2. Follow the above procedure to install the bearing mount (43) to the opposite end of the system.
Figure 3-40
Installing the tubular motor mount
2
1/4"-20 x 1/2" hex bolt
38
Back plate
14
1/4" hex nut
118
Motor mount
36
Top mounting bracket
48
4801-5405
Unitized System Komfort Kool
