Flat Bottom Reservoir Support Brackets for End Pump Only
1. Determine the height at which the bottom of the Komfort Kool system should be mounted above the
ground. Make a mark on each end post to represent the height.
2. Stretch a chalk line between the marks on the end posts.
3. Align the bottom edge of the metal support brackets (31) with chalk line and at position at distances
as shown in
. Use 1/4" x 1-1/2" lag screws (5) for wood framing or #14 x 1" hex
head TEK screws (3) for metal framing.
NOTE:
System on brackets is shown in
. The spacing for the system on concrete
is the same.
Figure 3-4
Support bracket locations
3
#14 x 1" hex head TEK screw
29
Splice
5
1/4" x 1-1/2" lag screw
31
Metal support brackets
4801-5405
Unitized System Komfort Kool
17
