Connecting the Drive Shafts for Lock Motor
Slide the end of drive shaft (54) into the pinion sleeve (53) and align the holes. Use M10 bolts (4) and
M10 lock nuts (15) to secure the drive shaft (54) to the pinion sleeve (53).
IMPORTANT:
Make sure that end of drive shaft (54) is flush with end of the pinion sleeve (53).
Figure 3-16
Connecting the drive shafts
4
M10 x SS bolt
53
Pinion sleeve
15
M10 lock nut
54
Drive shaft
Assembling the Lock Drive Insert
Slide the drive insert (55) into the end of drive pipe (50) and align the holes.
NOTE:
Make sure that end of drive insert (55) is flush with the end of drive pipe (50).
Figure 3-17
Assembling the lock drive insert
50
Drive pipe
55
Drive insert
28
4801-5405
Unitized System Komfort Kool
