12.3
We begin the treatment
In Mach program, we select „File/Load G-Code” menu position or we click „Load G-Code” button on
the main screen. Select the file we created earlier: „planing.tap”. When the file is loaded, we can
initially set the machine over the material and enter on the MDI screen.
•
G0G53 Z0 <enter>
•
G0 X0 Y0 <enter>
The firs command causes the Z-axis rises maximum high, the second one is to set the machines tool
XY axes in the defined earlier zero point of the material.
Go to the main screen again and click „Cycle Start” button – the treatment start.
Below a photo taken during the work:
You can change the tool for an engraving cutter and load the second,
previously generated trajectory. Before processing, there is one im-
portant detail. When planning the surface we lowered its level, the
engraving logo would be 0.1mm depth, and not 0.3mm like the one
we had assumed. “This can be easily remedied by reducing the zero
point level about 0.2mm (planned depth). Click on the text box that
displays current Z position and type on your keyboard "0.2 <enter>".
C S - L a b s . c . – C S M I O / I P - S - C N C C o n t r o l l e r
Page 85
