Crystal Vision
Statesman
TANDEM 3G User Manual R1.4
55
23/04/2012
The recalling of previously stored presets can also be implemented externally via the GPI port.
To sanction this facility, enable the GPI controls preset recall box.
Factory reset
The user has the choice of performing a total factory reset or a partial reset. Factory Reset will
return all parameters to their factory default values and erase all user-stored configuration
presets. Selecting the Defaults option will perform the same reset to factory defaults values but
will leave any user-stored configurations unaffected.
Note:
Factory reset will erase all user-stored presets
Parameter
Default value
De-embedded Input Audio
Delay, Mono, Invert all un-ticked
AES Input Audio
Delay, Mono, Invert all un-ticked
Output Audio Groups
Enabled
VANC Blank
Un-blanked
Video delay
0
Audio and Video delay
Both have minimum video delay
AES Setup
Balanced inputs
Audio delay
3ms
Video input select
BNC
Embedder output routing
Group 1 to group 1…..Group 4 to group 4
AES output routing
None (AES set to inputs)
Video gains
100%
Video lift
0%
De-embedder gains
0dB
AES input gains
0dB
Embedder pattern
SMPTE
Preset selection
Preset 1
GPI control of Presets
Disabled
GPO6 Alarms
Un-selected
Silence delay
0 seconds
Alarms
The GPO6 output is reserved for alarm indication and may have assigned any of the 37 video
and audio alarms.
Any number of alarms may be assigned to the GPI output, video missing and input groups
missing will assert an alarm immediately whereas the silence alarms can be assigned a delay
timer to delay the time after which an alarm is asserted. This ability is especially useful to
prevent false alarming during quiet periods in the audio.
