Crystal Vision
Card edge operation
TANDEM 3G User Manual R1.4
27
23/04/2012
AES setup
From the STATUS top menu rotate SCROLL/ADJ to select the AES Setup menu. Press
ENTER and then rotate SCROLL/ADJ to access the AES Setup menu options. This menu is
where the AES I/O is individually configured to be either inputs or outputs.
Menu
Comment
AES1
Configuration
Rotate the SCROLL/ADJ. control to show the individual AES I/O
controls.
AES1 to AES8.
Press ENTER and rotate SCROLL/ADJ. to select.
Terminated, Hi Z, Output.
AES8
Configuration
AES format
Rotate the SCROLL/ADJ. control to show the AES I/O format
control.
Press ENTER and rotate SCROLL/ADJ. to select.
Balanced, Unbalanced.
Note:
The AES format control acts globally on all AES inputs and outputs.
AES format
TANDEM 3G has eight AES I/Os all of which can be configured independently to be either
an input or an output. It is also possible to select globally the format to be either balanced or
unbalanced giving 110R differential and 75R single sided when termination is applied. Hi Z
will have an impedance of approximately 1k.
Presets menu
From the STATUS top menu rotate SCROLL/ADJ to select the Presets menu. Press ENTER
and then rotate SCROLL/ADJ to access the presets menu options. To enter a sub menu once
selected press ENTER and use the SCROLL/ADJ control to traverse the sub menu.
Menu
Comment
Factory defaults
Rotate the SCROLL/ADJ. control to show the defaults menu.
Press ENTER to action.
Factory reset
Rotate the SCROLL/ADJ. control to show the factory reset menu.
Press ENTER to action.
Enable GPI
control of presets
Selecting ENABLE allows the recall of previously saved user
configurations via GPI inputs 1-4.
Enable, Disable
